unisonic technologies co., ltd 2sa1627a preliminary pnp epitaxial silicon transistor www.unisonic.com.tw 1 of 4 copyright ? 2011 unisonic technologies co., ltd qw-r217-004.b pnp epitaxial silicon transistor ? description the utc 2sa1627a is designed for general purpose amplifier and high speed switching applications. ? features * high voltage * low collector saturation voltage. * high-speed switching 1 to-126c 1 to-126 ? ordering information ordering number pin assignment lead free halogen free package 1 2 3 packing 2sa1627al-t60-k 2sa1627ag-t60-k to-126 e c b bulk 2sa1627al-t6c-k 2sa1627ag-t6c-k to-126c e c b bulk
2sa1627a preliminary pnp epitaxial silicon transistor unisonic technologies co., ltd 2 of 4 www.unisonic.com.tw qw-r217-004.b ? absolute maximum ratings (t a =25 c) parameter symbol ratings unit collector-base voltage v cbo -600 v collector-emitter voltage v ceo -600 v emitter-base voltage v ebo -7.0 v collector power dissipation p c 1.0 w collector current (dc) i c -1.0 a collector current (pulse) i cp (note 1) -2.0 a junction temperature t j 150 c storage temperature t stg -55 ~ +150 c notes: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functional device oper ation is not implied. 1. pw Q 10ms, duty cycle Q 50% ? electrical characteristics (ta=25 c, unless otherwise specified) parameter symbol test conditions min typ max unit collector cut-off current i cbo v cb = -600v, i e =0 -10 a emitter cut-off current i ebo v eb = -7.0v, i c =0 -10 a dc current gain h fe1 (note 2) v ce = -5.0v, i c = -0.1a 30 58 120 dc current gain h fe2 (note 2) v ce = -5.0v, i c = -0.5a 4 19 collector-emitter sa turation voltage v ce(sat) (note 2) i c = -0.3a, i b = -0.06a -0.28 -1.5 v base-emitter satura tion voltage v be(sat) (note 2) i c = -0.3a, i b = -0.06a -0.85 -1.2 v gain bandwidth product f t v ce = -10v, i e =0.1a 10 28 mhz output capacitance c ob v cb = -10v, i e =0, f=1.0mhz 42 50 pf turn-on time t on 0.1 0.5 s storage time t stg 3.5 5.0 s fall time t f i c =-0.5a, r l =500 ? , i b1 = -i b2 = -0.1a, v cc =-250v 0.08 0.5 s note: 2. pulsed pw Q 350s,duty cycle Q 2% ? classification of h fe1 rank m l k range 30-60 40-80 60-120
2sa1627a preliminary pnp epitaxial silicon transistor unisonic technologies co., ltd 3 of 4 www.unisonic.com.tw qw-r217-004.b ? typical characteristics collector current, i c (ma) i b = 2 . 0 m a dc current gain, h fe collector current vs. base to emitter voltage base to emit ter voltage, v be (v) -0.01 -0.1 -0.3 -1.0 0 -0.4 -0.8 -1.2 -1.6 -0.03 -0.003 -0.2 -0.6 -1.0 -1.4 v ce =-5.0v collector and base saturation voltage vs. collector current collector current, i c (a) -0.1 -0.3 -1.0 -3.0 -0.005 -0.01 -0.05 -0.2 -0.03 -0.02 -0.1 -0.5 i c =5i b v be(sat) v ce(sat)
2sa1627a preliminary pnp epitaxial silicon transistor unisonic technologies co., ltd 4 of 4 www.unisonic.com.tw qw-r217-004.b ? typical characteristics(cont.) turn off time vs. collector current collector current, i c (a) 0.2 1.0 2.0 5.0 -0.03 -0.1 -0.3 -1.0 -3.0 switching time, t sw (s) 0.5 0.1 i c /i b =5 v ce =-250v i b1 =ib 2 t stg t f gain bandwidth product vs. collector current collector current, i c (ma) 2.0 10 20 100 -0.002 -0.005 -0 .02 -0.05 -0.2 gain bandwidth product, f t (mhz) 5.0 1.0 v cb =-5.0v 50 -0.01 -0.1 output capacitance vs. collector to base voltage collector to base voltage, v cb (v) 5.0 20 50 200 -3.0 -10 -30 -100 -300 output capacitance, c ob (pf) 10 2.0 i e =0 100 collector power dissipation vs. ambient temperature ambient temperature, ta ( ) 0.2 0.6 0.8 1.2 025 75100 150 collector power dissipation, p c (w) 0.4 0 1.0 50 125 free air utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
